After The Spring Festival, The Maintenance And Maintenance of The Sand Mill

The end of the Spring Festival holiday, the enterprises have resumed work and production, and the frequency of use of equipment has gradually increased. As an indispensable and important equipment in the production line, the sand mill needs to be maintained and maintained after a period of downtime to ensure its normal operation and improve its service life.

If the sander is not used for a long time, it may cause dust accumulation inside the equipment and agglomeration of the grinding medium. The existence of these problems will not only affect the normal operation of the sand mill, reduce production efficiency, but also may cause equipment failure and increase maintenance costs. Therefore, it is very important to carry out the necessary maintenance and maintenance of the sand mill after the Spring Festival.

Several points about the maintenance and maintenance of the sand mill

1. Check fasteners: Before starting the machine after the Spring Festival, check whether fasteners in various parts of the sand mill are loose. If they are loose, they should be fastened in time to avoid falling off or damage to equipment parts due to vibration.

2. Clean up internal dust: After long-term shutdown, there may be dust accumulation inside the sand mill. The equipment inspection door should be opened to clean the dust inside the sanding cylinder and on the grinding medium to ensure that the equipment is clean inside.

3. Check the lubrication system: the lubrication system is essential for the normal operation of the sander. Check whether the lubricating oil is sufficient and whether the oil is clean. If the amount of oil is insufficient or the quality of oil deteriorates, the lubricating oil should be added or replaced in time.

4. Check the seals: the performance of the seals directly affects the sealing and production efficiency of the sand mill. Should check whether the seal is intact, if found that the seal aging or damage should be replaced in time.

5. Adjust the grinding medium: The grinding medium may be worn or caked during long-term use. The state of the grinding medium should be checked, and if there is any problem, the grinding medium should be adjusted or replaced in time to ensure the grinding effect of the sand mill.

6. Test run: After completing the above inspection and maintenance, test run should be carried out to observe whether the running state of the sand mill is normal. If there is abnormal sound or vibration, it should be checked and solved in time.

7. Inspection and control system: The operation control system is the key system for the control of the entire sand mill. Through the inspection and testing of each link, to ensure that each system is producing, and to ensure that the real-time data of the sand mill is mastered in time.

8. Regular maintenance: In order to ensure the stable operation of the sand mill, a regular maintenance plan should be developed, such as a comprehensive inspection every quarter to discover and solve potential problems in time.

After the Spring Festival, scientific maintenance and maintenance of the sand mill is the key to ensure its normal operation and improve its service life. Through the introduction of this article, we hope to provide useful reference for the majority of enterprises. Let us work together to protect the stable and efficient sanding machine on the production line of the enterprise.